Bollards
At Truline Australia we manufacture all our bollards and wheel stops onsite in Melbourne. Our bollards range from 50mm to 680mm in diameter.
Available finishes include:
- Galvanised steel
- powder coated steel
- stainless steel
- polypropylene among others
We also offer a range of mounting options including:
- surface mount / bolt down.
- Permanent in ground or sleeve in ground
- Removeable
- Lockable
- Installation service available in Victoria
Bollard – Surface Mounted 90mm Dia / 900mm High
$168.00 + GST
This bollard is manufactured from hot dipped galvanised steel to provide a virtually maintenance free, long-life surface which is easy to clean.
Surface mounted bollards are perfect for surfaces which can’t be core drilled or concrete areas that have already been poured, which require bollards to be added afterwards. With all the fixings provided, these bollards are easy to install. All that is required is a drill and a 14mm drill bit. An installation guide is available to assist you with installation.
Specifications:
- Material – Galvanised Steel
- Colour – Powder-Coated Yellow with Red
- Height – 900mm
- Diameter – 90mm
Bollard – Surface Mounted 115mm Dia / 900mm High
$264.00 + GST
The 115mm Surface Mount Bollard is very popular for general use. Assess the risks and threats, determine the areas requiring protection and custom order these to fit, according to your requirements.
Suitably designed for car park and general equipment protection. This bollard restricts vehicle access whilst allowing clear pedestrian flow. Ideal for maintaining Occupational Health and Safety requirements in areas such as loading docks and bus depots where heavy vehicles are present. The safety yellow powder coat finish with red reflective band make these bollards very visible and functional. Easy to install yourself.
Specifications:
- Material – Galvanised Steel
- Colour – Powder-Coated Yellow with Red
- Height – 900mm
- Diameter – 115mm
Bollard – Surface Mounted 140mm Dia / 900mm High
$328.00 + GST
The 140mm Surface Mount Bollard is one to consider for your asset protection needs. Assess the risks and threats, determine the areas requiring protection and custom order these to fit, according to your requirements.
Suitably designed to car park regulations. Car Park Bollards stand at 1300mm. This bollard restricts vehicle access whilst allowing clear pedestrian flow. Ideal for maintaining Occupational Health and Safety requirements in areas such as loading docks and bus depots where heavy vehicles are present. The safety yellow powder coat finish with red reflective band make these bollards very visible and functional.
Easy to install yourself.
Specifications:
- Material – Galvanised Steel
- Colour – Powder-Coated Yellow with Class 1 Red Reflective Tape
- Height – 900mm
- Diameter – 140mm
Bollard – Surface Mounted 140mm Dia / 1300mm High
$368.00 + GST
Suitable for DISABLED Parking
The 140mm Surface Mount Bollard is one to consider for your asset protection needs. Assess the risks and threats, determine the areas requiring protection and custom order these to fit, according to your requirements.
Suitable designed to car park regulations. Car Park Bollard stands 1300mm. This bollard restricts vehicle access whilst allowing clear pedestrian flow. Ideal for maintaining Occupational Health and Safety requirements in areas such as loading docks and bus depots where heavy vehicles are present. The safety yellow powder coat finish with red reflective band make these bollards very visible and functional.
Easy to install yourself.
Specifications:
- Material – Galvanised Steel
- Colour – Powder-Coated Yellow with Class 1 Red Reflective Tape
- Height – 1300mm
- Diameter – 140mm
Bollard – Surface Mounted 165mm Dia / 1300mm High
$486.00 + GST
Our 165mm Surface Mount Bollard is a heavy duty protection bollard useful in areas where ram raids could be likely or where vehicles are travelling at varying speeds in the vicinity of buildings or other assets.
Perfect for a range of entry points including to banks, shopping centres, commercial properties, and boom gates.
When you strategically place these bollards, they become the perfect deterrent to crime. The powder coat finish in safety yellow provides a durable finish and reflective red band provides heightened visibility on this impressive bollard.
Specifications:
- Material – Galvanised Steel
- Colour – Powder-Coated Yellow with Class 1 Red Reflective Tape
- Height – 1300mm
- Diameter – 140mm
Bollard – Below Ground 900mm Dia / 1200mm High (900mm Above Ground)
$176.00 + GST
Install this 90mm Below Ground bollard where you need safety and security and get the job done properly. Once installed you will have a 1200mm bollard protecting your assets (with 900mm above ground, 300mm below ground). The In-Ground 90mm Bollard features a separate cap so that you can fill the bollard with concrete for extra strength if required.
Constructed from hot dipped galvanised steel and powder coated with safety yellow and finished with a red reflective band, these bollards will do the job!
Specifications:
- Material – Galvanised Steel
- Colour – Powder-Coated Yellow with Class 1 Red Reflective Tape
- Height – 900mm above ground. 1200mm total length, with 300mm below ground
- Diameter – 90mm
- Fixings – Anchor rod is included at the base which can be removed when core drilling into existing concrete or inserted when setting into new concrete
Gas Meter Bollard – Below Ground 115mm Dia / 1300mm High (800mm Above Ground)
$249.00 + GST
The Gas Meter Bollard is manufactured to comply with gas meter bollard regulations.
It is easily installed using the comprehensive instructions available.
This Gas Meter Bollard is finished in a safety yellow powder coat after being hot dipped galvanised, and comes complete with a reflective band for night time visibility.
Many councils and Government bodies require hot dipped galvanised steel to be used due to its non-corrosive properties, so it ticks all the right boxes.
This Bollard is 115mm in diameter and has a total length of 1300mm. Once inserted 500mm into the ground, it has a height of 800mm which meet codes.
We recommend checking code requirements and regulations with your specific council.
Specifications:
- Material – Hot Dipped Galvanised Steel
- Colour – Powder-Coated Yellow with Class 1 Red Reflective Tape
- Height – 800mm above ground. 1300mm total length, with 500mm below ground
- Diameter – 115mm
- Fixings – Anchor rod is included at the base which can be removed when core drilling into existing concrete or inserted when setting into new concrete
Bollard – Below Ground 140mm Dia / 1600mm High (1300mm Above Ground)
$348.00 + GST
Suitable for DISABLED Parking
The 140mm Inground Bollard is one to consider for your asset protection needs. Assess the risks and threats, determine the areas requiring protection and custom order these to fit, according to your requirements.
Designed to car park regulations, these Car Park Bollards stand at 1300mm. This bollard restricts vehicle access whilst allowing clear pedestrian flow. Ideal for maintaining Occupational Health and Safety requirements in areas such as loading docks and bus depots where heavy vehicles are present. The safety yellow powder coat finish with red reflective band provides heightened visibility.
Easy to install yourself.
Below Ground 140mm Bollard is ideal for installation in areas where assets require protection and bollard strength is important.
Specifications:
- Material – Hot Dipped Galvanised Steel
- Colour – Powder-Coated Yellow with Class 1 Red Reflective Tape
- Height – 1300mm above ground. 1600mm total length, with 300mm below ground
- Diameter – 140mm
- Fixings – Anchor rod is included at the base which can be removed when core drilling into existing concrete or inserted when setting into new concrete
Bollard – Below Ground 165mm Dia / 1600mm High (1300mm Above Ground)
$468.00 + GST
Our 165mm Inground Bollard is a heavy duty protection bollard useful in areas where ram raids could be likely or where vehicles are travelling at varying speeds in the vicinity of buildings or other assets.
Perfect for a range of entry points including to banks, shopping centres, commercial properties, and boom gates.
When you strategically place these bollards, they become the perfect deterrent to crime. The powder coat finish in safety yellow provides a durable finish and reflective red band provides heightened visibility on this impressive bollard.
Specifications:
- Material – Hot Dipped Galvanised Steel
- Colour – Powder-Coated Yellow with Class 1 Red Reflective Tape
- Height – 1300mm above ground. 1600mm total length, with 300mm below ground
- Diameter – 165mm
- Fixings – Anchor rod is included at the base which can be removed when core drilling into existing concrete or inserted when setting into new concrete
Flexible PVC Guide Posts
$37.00 + GST
Specifications:
- VicRoads approved and tested against state standards
- Can withstand a minimum of 10 front and rear impacts by a vehicle travelling at 60km/hr and 5 front impacts by a vehicle travelling at 100km/hr
- No variation in material properties between -10C and 50C
- UV resistant, retain around $85 of its colour appearance and physical properties over a 5-year period
- Includes 50 x 200mm Class 1A Delineators
Retractable Belt Queue Bollard & Base In Stainless Steel
$154.00 + GST
The Stainless Steel Retractable Belt Bollard with Matching Base is perfect for organising lines and queues or to section off an area of your floor space to restrict public access.
They feature a retractable belt made of woven nylon and a weighted base that makes them very sturdy. Requiring only simple self-assembly to combine post and base, this pedestrian management solution is ideal for high traffic areas.
Specifications:
- Height – 880mm
- Diameter – 60mm
- Belt colour – Option of Black or Red
- Belt Length – 2000mm
- Base Width – 310mm